4100 SYN-NERGY Lubrificante para Motor 15w50 1L – Motul

YPE OF USE

Synthetic Technosynthese® lubricant specially designed for cars powered by Gasoline or Diesel engines, naturally aspirated or turbocharged, indirect or direct injection.
Provides superior engine cleanliness and high protection for extended engine life.
Suitable for all type of fuels: leaded or unleaded Gasoline, Ethanol, LPG, Diesel and biofuels.
Compatible for catalytic converters.
Before use always refer to the owner manual or handbook of the vehicle.

PERFORMANCES

STANDARDS ACEA A3/B4
API PERFORMANCE SP
The ACEA B4 performance requires an outstanding detergent/dispersant capacity and a better viscosity increase resistance due to soot produced by direct injection Diesel engines (except VW unit injector engines that require MOTUL 8100 XCLEAN 5W-40).
The API SP standard is fully backward compatible over API SN standard and all former API standards.
API SP lubricants provide outstanding oxidation resistance, better anti-deposits protection, better engine cleanliness, antiwear protection and enhanced performance at cold temperature for Fuel Economy savings during the whole oil life span.
Its viscosity grade SAE 15W-50 is fully suitable for many Gasoline and Diesel engines working in all climate conditions and
is designed to allow reduced oil consumption.
The synthetic base stock reinforced with Technosynthese® provides very high lubricating power which reduces frictions
decreases the volatility and ensures resistance to very high temperatures reached in modern engines.
Anti-oxidation, Anti-wear, Anti-corrosion, Anti-foam properties.

RECOMMENDATIONS

Drain interval: according to manufacturers’ recommendations and tune to your own use.
Can be mixed with synthetic or mineral oils.
Before use always refer to the owner manual or handbook of the vehicle.

PROPERTIES

Viscosity grade SAE J 300 15W-50
Density at 20°C (68°F) ASTM D1298 0.870
Viscosity at 40°C (104°F) ASTM D445 146.0 mm²/s
Viscosity at 100°C (212°F) ASTM D445 19.6 mm²/s
Viscosity Index ASTM D2270 154.0
Pour point ASTM D97 -45.0 °C / -49.0 °F
TBN ASTM D2896 11.0 mg KOH/g
Flash point ASTM D92 226.0 °F / 439.0 °F